Siemens M65 - Manual (Page 48)

©
Siem
ens AG
2003, I
:\Mob
il\R6
5\M65_X-cite
\e
n\f
ug\_v
on
_it
l\M65_SMS.f
m
47 SMS
VAR Langua
ge: en; V
A
R issue
date: 040413
left page (47) of M65 X-Cite en, A31008-H7150-A1-1-7619 (14.04.2004, 10:42)
Setting
SMS signature
C
¢
M
¢
Message setup
¢
SMS
¢
SMS signature
You can enter a “signature” with up
to 16 characters. This signature will
then be attached to each SMS except
for a §Reply§ and when changes are
made to an existing SMS.
SMS profiles
C
¢
M
¢
Message setup
¢
SMS
¢
SMS profiles
Up to 5 SMS profiles can be set. The
transmission characteristics of an
SMS are defined in these. The pre-
setting depends on the SIM card
inserted.
Activate profile
I
Select profile.
C
Activate.
Set profile
I
Select profile.
§Edit§ Open to edit the profile.
Service
centre
Enter the phone numbers for
the service centre as provided
by the service provider.
Recipient Enter a standard recipient for
the profile.
Message
type
• Manual : Inquiry for all mes-
sages.
• Standard text : Normal SMS
message.
• Fax : Transmission via SMS.
• E-mail : Transmission via
SMS.
• New : You may need to
obtain the required code
number from your service
provider.
Validity
period
Period in which the service
centre is to try to deliver the
message:
Manual , 1 hour , 3 hours ,
6 hours , 1 day , 1 week ,
Maximum *
* Maximum period that the
service provider permits.
Status
report
=
Receive confirmation of suc-
cessful/failed transmission of a
message. This service may be
subject to a charge.
Direct
reply
=
If activated, the reply to your
SMS message is handled via
your service centre (for infor-
mation, please contact your
service provider).
SMS via
GPRS
=
Send SMS automatically via
GPRS (p. 86).
Save aft.
send
Sent SMS messages are
saved in the Sentbox list.