Preventing accidental activation, Clear sim card barring, Change pin2 – Siemens M65 User Manual

Page 19: Chg.phonecode

Sieme

2003, I:\Mobil

\R65\M

65_X-cite\e

n\fug\_von_itl\M

65_Sta

rtup

Security

VAR Langua

ge: en; V

R issue

date: 040413

left page (18)

of M65 X-Cite en, A31008-H7150-A1-1-7619 (14.04.2004, 10:42)

Security

Codes

Select function

Change PIN2

(Display only if PIN2 is available).

Proceed as for

Change PIN

Chg.phonecode

(Change phonecode)
You define the phone code (4 to

8 digits) when you call up a phone-

code protected function for the first

time (e.g.

Direct call

, p. 28). It is then

valid for all phone-code protected

functions.

Following the third unsuccessful

attempt, access to the phone code

and the functions that use it is

denied. If this occurs, contact the

Siemens Service (p. 117).

Clear SIM card barring

If the PIN is entered incorrectly three

times, the SIM card is barred. Enter

the PUK (MASTER PIN) provided by

your service provider with the SIM

card in accordance with the instruc-

tions. If the PUK (MASTER PIN) has

been lost, please contact your serv-

ice provider.

Preventing accidental

activation

Even if PIN control is deactivated

(p. 17) confirmation is required to

switch on the phone.
This prevents accidental activation

of the phone, e.g. when you are car-

rying it in a bag or when you are trav-

elling in an aircraft.

Hold down.

Press. The phone switches

on.

§Cancel§

Press this key or take no

action. The phone does

not switch on.