Sterling Power Products Elite XS - Manual (Page 10)

6 Iss 4
Photo 11 Photo 12
Safety warning and user guidance
Lifting components over 10kg
Please note that these instructions are to be used as a guide only.
Seat:
1. Lift rotate lever upwards and turn seat 90° clockwise (Photo 7).
2. Stand behind seat (Photo 8).
3. Fold backrest forward and flip up armrests.
4. Place hands on either side of seat base, lift seat vertically keeping back posture
upright. Bend knees if required (Photos 9 & 10).
5. Place seat at desired location keeping back posture upright at all times, bend knees
where required.
Batteries:
1. Remove battery panel (Photo 11) and unstrap and disconnect batteries (Photo 12).
2. Bend knees with battery positioned centrally in front of you (Photo 13).
3. Grab battery handle with both hands.
4. Lift vertically by straightening legs, keeping back posture upright (Photo 14).
5. Place battery at desired location, keeping back posture upright and bending knees
if required.
Photo 7 Photo 8 Photo 9
Photo 10
Photo 13
Photo 14