User instructions – Smeg DWF614WH User Manual
Page 12
User instructions
34
ADDITIONAL FUNCTIONS (Customizing the consumer parameters)
The electronic control system allows personalizing the machine use directly through a
programming procedure not directly accessible that allows: regulate water hardness level.
To access the programming environment, the appliance must be turned on with the door open.
Then proceed as follows:
• press
the
ECO DRY (4) button until the H symbol appears on the display, followed by the
number 3, > H3;
• press
the
PROGRAM DELAY (5) button the number of times needed to select the right setting
level for the hardness of the water (H0, H1, H2, H3, H4, H5);
• press
the
START/STOP (6) button to confirm the setting and return to the program setting
menu.
N.B.: after 2 minutes, the appliance exits the parameter setting menu automatically.
WATER HARDNESS TABLE
WATER HARDNESS
German Degrees (°dH)
French Degrees (°dF)
SETTING
0 - 4
0 - 7
.h 0
5 - 15
8 - 25
.h 1
16 - 23
26 - 40
.h 2
24 - 31
41 - 60
.h 3
32 - 47
61 - 80
.h 4
48 - 58
81 - 100
.h 5
Contact your local water board for information on the hardness of your water supply.