Sanyo AVP-429 - Manual (Page 26)

Watching TV
Adjusting Volume
Using FREEZE button
Using ZOOM button
Normal
If you enter channel number with 0-9 only (without
pressing OK), channel selection will be made if there is no
operation for a few seconds.
For digital TV channel
Press the 0-9 number buttons and dash(-) to input a digital
channel number, the TV goes to the selected channel directly.
(e. g., channel 8-3, just press
8, - and 3 one by one)
Method 4 - Using master channel list
Press the LIST button to display the master channel list, you
may select channel with the ??and OK buttons.
Method 5 - Using favorite channel list
Press the FAVORITE button to display a desired favorite
channel list, you may select channel with the ??and OK
buttons.
LIST
FAVORITE
Using VOL+ or VOL- on the remote control or on the TV
Press the
VOL+ or VOL- to increase or decrease the volume.
Using MUTE on the remote control
Press MUTE to mute the sound. Press it again to cancel the
mute.
Press FREEZE to temporarily capture a program's picture.
You can use this feature to write down information such as
phone numbers, recipes, etc. You may press any key to
cancel FREEZE and return to normal viewing.
FREEZE
Select to match the sources image.( 4:3 to 4:3, 16:9 to 16:9)
ZOOM
Press ZOOM repeatedly to choose a proper screen aspect
ratio, particularly when viewing non-16:9 programming.
The following modes are available for your choice.
The zoom mode options may
differ from different formats of
the input signal.
Example:
Normal
The TV automatically cancels FREEZE and returns to normal viewing in
about a minute.
When you choose NORMAL to view a 4:3 program, two black bars keep on
the two sides of the screen.
For additional protection to the screen, when you are viewing a 4:3 program,
please DO NOT use the
NORMAL feature for a long period of time.
Selecting Channels
Source Final
25