Sony LBT-DR5 - Manual (Page 27)

27
Looping part of a
CD
— Loop
Flashing part of a
CD
— Flash
DJ Effects
With the Loop function, you can repeat part
of a CD during playback. This lets you create
original recordings.
/ Press and hold LOOP during
playback at the point you want to
start the Loop function, and release
to resume normal playback.
To adjust the loop length
Turn the jog dial while holding LOOP (or
press FILE SELECT V/v while holding LOOP
on the remote) to select different loop lengths.
With the Flash function, you can “flash” the
CD sound during playback. This lets you
create original recordings.
/ Press and hold FLASH during
playback at the point you want to
start the Flash function, and release
to resume normal playback.
To adjust the flash length
Turn the jog dial while holding FLASH (or
press FILE SELECT V/v while holding
FLASH on the remote) to select different flash
lengths.
To use LOOP and FLASH together
Press and hold both LOOP and FLASH at the
same time.
Note
The loop and flash length cannot be adjusted
in stop mode. Adjust the loop and flash
lengths during playback.
LOOP Jog dial
FLASH Jog dial LOOP