Sony LBT-DR5 - Manual (Page 16)

16
Tips
• When you want to record on the reverse side,
press ª after pressing r REC in step 5 so the
indicator on the ª button (for the reverse side)
lights up green .
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, select “MANUAL”
in step 2, then press TUNING +/– to tune in the
desired station.
• When you want to reduce the hiss noise in low-
level, high-frequency signals, press DOLBY NR
before step 7 so “DOLBY NR B” appears in the
display.
• To record with the surround effect, press
SURROUND so “SUR ” appears in the
display.
The equalizer settings will not be recorded.
• To improve broadcast reception, move the
supplied antennas.
Playing a tape
You can play any type of tape, TYPE I
(normal), TYPE II (CrO
2
), or TYPE IV (metal).
The deck automatically detects the tape type.
You can also use the AMS* functions to locate
quickly the desired songs.
To select either deck A or B, press DECK A
( or DECK B ( on the remote.
* AMS: Automatic Music Sensor
1 1
2
3
p p
VOLUME
DOLBY NR 0/
)
1/u
(Power)
3 P
P
DECK A (
DECK B (
VOL +/–
0/
)
AMS =/+
Recording from the radio
(continued)