Operation of your treadmill – Spirit XT600 User Manual
Page 17
15
Getting familiar with the control panel
XT600 / XT800 Console
Getting started:
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch
located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as
the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time. Then the
Time
and
Distance windows will display Odometer readings for a short time. The Time window will
show how many hours the treadmill has been in use and the
Distance window will show how
many miles (or Kilometers if the treadmill is set to metric readings) the treadmill has gone. Then a
message will scroll across the message window showing the current software version. The
treadmill will then enter idle mode, which is the starting point for operation.
Operation of Your Treadmill