Samsung MM-J5S - Manual (Page 10)

GB
Power sound function EQ /S.BASS (Super Bass) Function
This machine is equipped with the function of POWER SOUND,
which amplifies bass treble output to twice as much for powerful
surround-sound.
Press the POWER SOUND button on the front panel.
Result: P. SOUND is displayed for a few seconds.
A more powerful resonant sound is diffused.
To cancel this function, press POWER SOUND again.
Result: OFF is displayed for a few seconds.
Your Micro Component system has a bass amplification function
and equipped with a preset equaliser that allows you to
choose the most appropriate balance between treble and bass
frequencies , according to the type of music you are listening
to.That is called EQ/S.BASS.
This function makes the sound more powerful and real.
Press EQ/S. BASS on the front panel or EQ/S. BASS on the remote
control until the required option is selected.
To obtain a... Select...
Normal balance (linear)............................................PASS
Balance suitable for pop music............................POP
Balance suitable for rock music ..........................ROCK
Balance suitable for classic music.......................CLASSIC
Balance suitable for s-bass music.......................S-BASS
1
2
CD
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX PROGRAM/SET REP. A B
SLEEP EQ/S.BASS TAPE SPEED
MUTE
POWER SOUND DISPLAY PTY RDS
18
GB
19
Connecting Headphones
You can connect a set of headphones to your micro
component system so that you can listen to music or radio
programs without disturbing other people in the room.
The headphones must have a 3.5 mm connector or
appropriate adaptor.
Connect the headphones to the Phones connector on the rear panel
(or top right corner).
Result: The loudspeakers are no longer used for sound output.
Prolonged use of headphones at a high volume may damage your
hearing.
You can set the system to switch off automatically.
Example: You wish to fall a sleep to music.
Press SLEEP on the remote control.
Result: The following indications are displayed:
Press SLEEP one or more times to indicate how long the system should
continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing SLEEP
Change the remaining time by repeating Steps 1 and 2
To cancel the sleep timer function, press SLEEP one or more times until
OFF is displayed and the word SLEEP disappears.
Sleep Timer
CD
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX PROGRAM/SET REP. A B
SLEEP EQ/S.BASS TAPE SPEED
POWER SOUND DISPLAY PTY RDS
90 MIN 60 MIN 45 MIN
OFF 15 MIN 30 MIN
1
2
3
1,2,3
MUTE Function
You can turn the sound off temporarily.
Example:
You wish to answer a telephone call .
Press MUTE.
To switch the sound back on (at the same volume as before), press
MUTE again, or press the VOLUME+, -button.
1
2
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX PROGRAM/SET REP. A B
SLEEP EQ/S.BASS TAPE SPEED
MUTE
POWER SOUND DISPLAY PTY RDS
MM-J5-RDS(GB) 9/15/04 19:18 Page 18