StarTech.com HSB100SATBK - Manual (Page 6)

5. Connect the SATA power cable and the SATA data cables to the appropriate ports
provided on the back of the rear panel of the drive frame.
Installing the hard drive into the drive frame
1. Pull the spring lock to open the front door.
2. Position the hard drive near the entry of the frame, with the label of the hard drive
facing up, and the rear panel of the hard drive aimed towards the inside of the
computer.
3. Gently push the drive into the frame until the locking arm begins to close.
Instruction Manual
3
SATA Data and
power ports