Sharp UX-B800SE - Manual (Page 39)

Caller ID (Requires Service)
37
6. Special Fun
c
tions
programmed. Clear one of the keys
and then store a group.
4 Press the Group Key that you want
to use ( or ). (If you are
clearing a Group Key, press the
Group key that you want to clear
and go to Step 8.)
•
If [ALREADY STORED] or [RAPID #
STORED] appears, the key has
already been programmed. Clear the
key or try the other Group Key.
5 Select a destination using one of the
following methods:
•
Press a Rapid Key.
•
Press and enter a 2-digit
Speed Dial number.
•
Press or until the
desired destination appears in the
display.
•
Press , , or
(only for an e-mail
destination).
6 Press to enter the destination.
7
Repeat Steps 5 and 6 for each of
the other desired destinations
(maximum of 20).
•
You can press to scroll through
and check your entered destinations.
To delete a destination, press
when it appears.
33/G1 34/G2
SPEED DIAL
8 When you have finished entering
the destinations, press .
9 Press to exit.
STOP
Important: To use this function, you
must subscribe to a Caller ID service
from your phone company. The
machine may not be compatible with
some Caller ID services.
Caller ID
(Requires Service)
If you subscribe to a Caller ID service,
you can have the machine show the
name and number of the caller when
you receive a call.
1
Press , then until
[ OPTION SETTING] appears .
2
Press , then until
[ CALLER-ID] appears.
3 Press (YES) to turn on Caller
ID. (To turn off Caller ID, press
and go to Step 7.)
4
If the area code must not be
included when you dial a local
phone number (within your area
code), press to select SET
and enter your area code in Step 5.
(This will remove the area code from
local numbers stored in the Caller
ID list, allowing you to automatically
dial those numbers from the list (see
FUNCTION