Specifications – Samson SM10 User Manual
Page 18

SM10
14
Inputs
Microphone
XLR balanced (2)
Line
1/4” TRS balanced (Ch 1-8),
1/4” stereo (Ch 9-10)
Input Impedance
Mic
1.5K Ohms
Line
23K Ohms (+4 dBu, Ch 1-8)
40K Ohms (-10 dBV, Ch 1-8)
20K Ohms (Ch 9-10)
Maximum Gain
Mic
65 dB
Line
39 dB
Line Operating Level
+4 dBu / -10 dBV selectable
Maximum Input Level (1 kHz, ±3 dB)
Mic Input
-4 dBu
Line Input
+28 dBu
Equivalent Input Noise
- 123 dBu unweighted
Outputs
Main Outputs
Type
1/4” TRS balanced (2), XLR (2)
Output Impedance
200 Ohms Main Out
Gain Range
-∞ to +15 dB
Max output level
+22 dBu
MON (Pre Fade Out)
1/4” impedance balanced mono output
(front panel), Stereo MON (rear panel)
EFX (Post Fade Out)
1/4” unbalanced
Output Impedance
100 Ohms
Headphone
1/4” TRS Stereo
Output (600 Ohm load)
100 mW
System
Frequency Response
10 Hz – 23 kHz ±1 dB
Signal-to-noise ratio
> 90 dB typical
THD
<0.01% typical
Crosstalk (1 kHz)
-70 dB between input channels
-70 dB between input/output channels
Phantom Power
48 Volts DC
Power Requirements
120-240 VAC / 50-60 Hz
Dimensions
19” L x 8.25” W x 1.75” H
484mm L x 210mm W x 44.5mm H
Weight
6 lbs / 2.8 kg
Specifications