Sanyo EM-S8597W - Manual (Page 9)

8
TIME, if you prefer to not have the clock
displayed, touch RESET pad. You can
check the clock time while cooking is in
progress by touching the CLOCK pad.
SETTING THE OVEN TIMER
1. Touch KITCHEN TIMER pad.
2. Enter the amount of time you want to
count down by touching the number
pads. Digit time is in minutes and
seconds and set left to right. Set one
digit (a 5 for 5 seconds) or up to four
digits (2405 for 24 minutes, 5
seconds).
3. Touch START/STOP pad.
NOTE:
·Time countdown can be seen in display
for 3 seconds before clock or cooking
time is returned to display.
·Touch TIMER and then touch RESET to
cancel TIMER during timing process.
·A long beep will sound at the end.
TIME COOKING
A. One-stage Cooking
1. Use the number pads to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
seconds. If you are setting a time
greater than one minute, you must
enter numbers for both minutes and
seconds.
For example, to set 20 minutes, enter
2,0,0,0.
If you want to set a power level other than
100% power, touch POWER/MELODY and
then use the number pads to enter the
power level. You can set the power level
from 1 to 9.Touch START/STOP to start
cooking.
USE THESE SINGLE DIGIT TO
REPRESENT POWER LEVELS
Number pad % of Power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
B. Multistage Cooking
You can program oven for 4 cooking
stages. Each stage can be
programmed with a different power
level and time. To program 2-stage,
3-stage or 4-stage cooking, touch
MEMORY COOKING once and
repeat the one-stage cooking steps 1
and 2 and touch START/STOP. The
oven will automatically proceed to the
end of cooking stages.
NOTE:
After stage 1 time has elapsed, one beep
sound, signaling the beginning of stage
2. After total time has elapsed, “END”
appears in display. Touch RESET pad or
open oven door to clear END before
starting another cooking function.
SETTING “DEFROST BY WEIGHT”