Sony DSX-S100 - Manual (Page 15)

15
• If the size of the USB device alone or combined with
the USB cable cannot be placed easily in the TUNE
TRAY, the device may be exceeding the tray
capacity.
Do not slide in the TUNE TRAY or the USB cable
forcefully.
• For “WALKMAN” users, use of the optional adaptor
XA-50WM is recommended. It is designed for use
with this unit only, and should not be used with the
other USB devices.
• This unit cannot recognize USB devices via a USB
hub.
• Slide in the TUNE TRAY and close the front panel
before playback, as damage may result in the case
of an obstruction in the car, etc.
• If the front panel does not fully open because of the
dashboard shape at the installation position, detach
the front panel and open the TUNE TRAY manually.
For how to detach the front panel, see page 7.
• It is extremely dangerous to connect or remove the
USB device while driving.
Display items
A Source, Track name, Artist name, Album
name
B Track name, Artist name, Album number*,
Album name, Track number/Elapsed playing
time, Clock
* Album number is displayed only when the album is
changed.
To change display items A, B, press (DSPL).
Notes
• Displayed items will differ, depending on the USB
device, recorded format and settings. For details,
visit the support site.
• The maximum number of displayable data is as
follows.
– folders (albums): 128
– files (tracks) per folder: 500
• It may take time for playback to begin, depending on
the amount of recorded data.
• DRM (Digital Rights Management) files may not be
played.
• During playback or fast-forward/reverse of a VBR
(Variable Bit Rate) MP3/WMA/AAC file, elapsed
playing time may not display accurately.
• Playback of the following MP3/WMA/AAC files is not
supported.
– lossless compression
– copyright-protected
Repeat play
1
During playback, press and hold the
select button.
The setup display appears.
2
Press the select button repeatedly
until the “REPEAT” appears.
3
Rotate the control dial to select the
play mode.
4
Press and hold the select button.
The setup is complete and the display returns
to normal play mode.
To return to normal play mode, select “REPEAT-
OFF.”
Shuffle play
1
During playback, press and hold
(ZAP/SHUF).
The lower half of the display starts flashing.
2
Press (ZAP/SHUF) repeatedly until the
desired setting appears.
After 3 seconds, the setting is complete.
To return to normal play mode, select “OFF. ”
Select To play
REPEAT-TRK track repeatedly.
REPEAT-ALB album repeatedly.
Select To play
ALBUM album in random order.
DEVICE device in random order.