beautypg.com

Operating instructions, tips, How to operate your dryer, Polyester knits & permanent press drying tips – Samsung DV665JS User Manual

Page 11: Loading clothes

background image

SAMSUNG Clothes Dryers Owner’s Instructions

B-2

HOW TO OPERATE YOUR DRYER

TO DRY CLOTHES USING PROGRAMS

1. Open the door and put the laundry in the dryer.

2. Press the power button.

3. Turn the Dial to choose the program.

You will see the indications light up on the control panel.

Cotton+More Dry

Cotton+Nomal Dry

Cotton+Less Dry

Cotton+Damp Dry

Air Fluff

Synthetic+Intensive Dry

Synthetic+Very Dry

Synthetic+More Dry

Synthetic+Nomal Dry

Synthetic+Less Dry

Synthetic+Damp Dry

Air Fluff

Cotton+Intensive Dry

Cotton+Very Dry

Cotton+More Dry

4. You can control the temperature button. (Cotton course)

5. Press the Start/Pause button adn dry cycle will begin.

TO DRY CLOTHES MANUALLY

1. Open the door and put the laundry in the dryer.

2. Press the power button.

3. Press the Time button to set drying time and to make dry your laundry as you want.

You may select drying time(1:25→1:15→1:05→.............. 25→15 →1:25) in order by pressing the

button continuously.

4. Press the Start/Pause button and dry cycle will begin.

POLYESTER KNITS & PERMANENT PRESS DRYING TIPS

• DO NOT OVERLOAD - Garments being dried or dewrinkled should tumble freely.

• REMOVE CLOTHES PROMPTLY- To help prevent wrinkling, remove clothes from the dryer promptly at

the end of the drying cycles.

• PLACE ON HANGERS- Permanent press and polyester knit garments look best if placed on hangers

after drying.

LOADING CLOTHES

Don’t overload your dryer. Crowded loads don’t dry efficiently and clothes may be unnecessarily

wrinkled.

As a general rule, sort clothes by surface texture, fabric, colour and weight, as you would for your washer.

Do not add fabric softener sheets once the load has become warm.

Do not overload. This wastes energy and caused wrinkling.

Do not dry the following items: fiberglass items, woolens, rubber- coated items, plastics, items with

plastic trim and foam-filled items.

Clothing with metallic components may damage the drum interior during drying.

Caution

The display indicates remaining time by automatically calculating the quantity of clothing and the

content of water. During the first phase of the drying cycle, the display will indicate the total estimated

time of the dry.

During the drying cycle, you will again be able to verify the degree of dryness of the clothing and then

increase or decrease the remaining time according to the desired results. (Max. DRY time is 3 hours)

Operating Instructions, Tips

This manual is related to the following products: