SIIG 04-0444A - Manual (Page 4)

4
4. Carefully align the card to the selected PCI slot,
push the board down firmly, but gently, until it is
well seated.
5. Replace the slot bracket's holding screw to secure
the card.
6. Replace the computer cover and reconnect the power
cord.
Windows Driver Installation
The Hi-Speed USB 5-Port PCI has three built-in USB hosts.
Two hosts handle USB 1.1 devices and the third host
handles USB 2.0 devices. USB 1.1 and USB 2.0 devices are
automatically routed to the correct USB hosts.
Windows Driver Installation
Windows 2000 Service Pack 4 or later, Windows XP
Service Pack 1 or later, Windows 2003 Server, and Vista
have built-in driver support for this controller. Just
install the board and Windows will automatically detect
and install the correct drivers for it. No additional driver
is necessary.
To Verify Windows Installation
Right click My Computer. Click Manage, then click
Device Manager.
Under Universal Serial Bus controllers:
- NEC PCI to USB Open Host Controller
- NEC PCI to USB Open Host Controller
- Standard Enhanced PCI to USB Host Controller
- USB Root Hub (USB 2.0 Root Hub in Win2K)
- USB Root Hub
- USB Root Hub