Sony CDP-XE320 - Manual (Page 10)

Playing CDs
10 GB
• CDP-XE520
REPEAT
• CDP-XE320 and CDP-XE220
REPEAT
Playing Tracks Repeatedly
You can play tracks repeatedly in any play mode.
When you directly locate a track numbered over 10
(CDP-XE520 and CDP-XE320 only)
Press >10 first, then the corresponding number buttons.
To enter “0,” use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
You can extend the playing time during Music Scan
(CDP-XE520 only)
Press MUSIC SCAN repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Note
If “- OVER -” (or “ ” for the CDP-XE320 and CDP-XE220)
appears in the display, the disc has reached the end while you
were pressing
). Press 0 or turn ≠ AMS ±
counterclockwise to go back.
To locate
The next or
succeeding tracks
The current or
preceding tracks
A specific track
directly
By scanning each
track for 10 seconds
(Music Scan)
(CDP-XE520 only)
A point while
monitoring the sound
A point quickly by
observing the display
during pause
You need to
Turn ≠ AMS ± clockwise until
you find the track. When using the
remote, press
+ repeatedly until
you find the track (CDP-XE520 and
CDP-XE320 only).
Turn ≠ AMS ± counterclockwise
until you find the track. When using
the remote, press
= repeatedly until
you find the track (CDP-XE520 and
CDP-XE320 only).
Turn ≠ AMS ± until you find the
track number you want. When using
the remote, press the number button of
the track (CDP-XE520 and CDP-XE320
only).
Press MUSIC SCAN. When you find
the track you want, press
· to start
playing the track.
Press ) (forward) or 0 (backward)
and hold down until you find the
point.
Press ) (forward) or 0 (backward)
and hold down until you find the
point. You will not hear the sound
during the operation.
Press REPEAT while playing a disc.
“REPEAT” appears in the display. The player repeats
the tracks as follows:
When the disc is played in
Continuous Play (page 6)
Shuffle Play (page 11)
Programme Play (page 12)
To cancel Repeat Play
Press REPEAT twice.
The player repeats
All the tracks
All the tracks in random order
The same programme
Repeating the current track (Repeat 1)
You can repeat only the current track in any play
mode.
While the track you want is being played, press
REPEAT repeatedly until “REPEAT 1” appears in the
display.
To cancel Repeat 1
Press REPEAT.