Sony PCWA-A500 - Manual (Page 22)

22
Connecting
Connecting to a DSL modem, cable modem, or ISDN router
If the Access Point is connected to a DSL modem, cable modem, or ISDN
router, computers that are connected to the Access Point can connect to the
Internet via the Access Point. Multiple computers can connect to the
Internet via the Access Point simultaneously.
POWER
MESSAGE
WIRELESS
NETWORK 1
NETWORK 2
WARNING
In the following cases, set the Access Point to Bridge mode before connecting
to the Access Point. If you mix up the NETWORK 1 and NETWORK 2 connectors
when the Access Point is in the NAT Router mode, problems may occur, such as
network anomalies or not being able to communicate with the Access Point.
• When the Access Point is connected to an ISDN router
• When the Access Point is connected to an existing LAN operating over
a DHCP server
For details on setting methods, see “Configuring the Access Point settings” (page 14).