Samsung Digimax S600 - Manual (Page 29)

ŝ28Ş
Special Effect : Photo Frame + / - button
ƈ You can use the + / - button to adjust the values for the RGB, ISO, white balance
and exposure compensation.
Main menu Sub menu Available camera mode
RGB R (Red), G (Green), B (Blue)
ISO AUTO, 50, 100, 200, 400
Exposure compensation -2.0~0.0~+2.0 (0.5EV steps)
WHITE BALANCE
AUTO, DAYLIGHT, CLOUDY,
FLUORESCENT H,
FLUORESCENT L, TUNGSTEN,
CUSTOM.
ƈ RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of
the images to be captured.
ƃ Setting RGB Values
1. Press the + / - button, and then use the UP and
DOWN buttons to select the RGB icon ( ).
The RGB menu bar will appear as shown.
2. Use the UP / DOWN / LEFT and RIGHT
buttons to select the desired RGB value.
- Up / Down Button : Navigates between R, G,
and B icons.
- Left / Right Button : Changes value of each icon.
3. When you press the + / - button again, the value you set will be saved and
RGB setup mode will end.
ƈYou can add 9 types of frame-like borders to a still image you want to capture.
1. Press the E button in any recording mode
(except for MOVIE CLIP and AUTO mode).
2. Select the ( ) menu by pressing the Left /
Right button.
3. Select a desired sub menu by pressing the Up /
Down button and press the OK button.
- : The photo frame will not be added.
4. The photo frame will appear.
Press the shutter button to capture an image
ſ Before taking a picture, you can change the frame by
pressing the + / - button. Change the frame type by
pressing the Up / Down / Left / Right button.
Photoframe
Capture:Shutter Frame:+/-
ſ When special effect (colour) from the icon other than is selected, it will not
be able to select the RGB.