Sundance Spas Spas 880 Series - Manual (Page 8)

6
Planning to Move the Spa into your yard
Use the information below, in Figure 2, and in the Spa Dimensions and Specifications
chart to plan the delivery of your spa into your yard. The Spa Dimensions and
Specifications chart list your spa model and its dimensions
Check your spa’s
dimensions Check the width of gates, doors, and sidewalks to make sure your
spa will pass through unobstructed.
During delivery, the spa must remain on the delivery cart at all
times. You may have to remove a gate or part of a fence to allow
an unobstructed passageway to the installation location.
Plan the delivery
route After referring to Figure 2, plan your spa’s delivery route into your
yard. Check off each item on the checklist below to verify your
plans.
❐
If the delivery route requires a 90° turn, check the
measurements at the turn to ensure the spa will fit.
❐ Are there protruding gas or water meters, or A/C units
obstructing the delivery path to your yard?
❐ Are there low roof eaves, overhanging branches, or rain
gutters that could be an obstruction to overhead clearance?
❐ Are there more than 6 consecutive stairs without a landing in
your delivery route? If so, you must consult your Sundance
dealer prior to delivery to make adequate preparations.
Use a crane The use of a crane for delivery and installation is sometimes
necessary. It is used primarily to avoid damage to your spa, your
property, or to delivery personnel. Your authorized Sundance
dealer may be able to assist you with the arrangements. If your
spa delivery requires the use of a crane, the cost of a crane is not
included in standard delivery service.
Continued on next page