Sharp UX-P410 User Manual

Page 9

UP and DOWN arrow keys
Enlarge/reduce setting: When making a copy of a document, press these
keys to select an enlarge/reduce setting (page 49).
Volume setting: When a document is not in the feeder, press these keys to

change the speaker volume when the

key has been pressed, or the

ringer volume at any other time (page 22).
FUNCTION key settings: Press these keys after pressing the FUNCTION
key to scroll through the FUNCTION MODE settings.

Number keys
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.

Panel release
Press this release to open the operation panel.

STOP key
Press this key to cancel an operation before it is completed.

COPY key
Press this key to make a copy of a document (page 49).

START/MEMORY key
Press this key after dialling to begin fax transmission (page 29). Press this key
before dialling to send a fax through memory (page 39).

key

Press this key to listen to the line and fax tones through the speaker when
faxing a document (page 29).

Left and right arrow keys
Auto-dial numbers: When sending a fax or making a phone call, press these
keys to scroll through your auto-dial numbers (page 34), the “REVIEW
CALLS” list (only available if you have Caller ID; page 59), and the last
number dialled (redial; page 36).
FUNCTION key settings: Press the right arrow key after scrolling with the up
and down arrow keys to select a FUNCTION key setting.

FUNCTION key
Press this key followed by the arrow keys to select special functions and
settings.