Seiko Group OFL-12 SERIES - Manual (Page 7)

- vi -
The available consumable items are listed in Table 0-2.
Table 0-2 Consumable Items
Part Part code Qty. Remarks
Polishing film (adhesive
removal) KJW10010
0
100
sheets
change after 1 use
Polishing film (grinding) KJW10020
0
10
sheets
change after 10 use
Polishing film (polishing) KJW10030
0
10
sheets
change after 10 use
Polishing film (finishing) KJW10040
0
10
sheets
change after 10 use
Polishing fluid KJA100100 2
(100
ml
2)
can polish approximately
600 ferrules per container
(12 ferrules at one time, 50
uses)
Standard consumable
supplies kit KJS100100 1 set contents:
Polishing film
adhesive removal 100
grinding 10
polishing 10
finishing 10
Polishing fluid 2
The Standard Consumable Supplies Kit (part code 110-S-001) is sufficient to polish
about 1200 ferrules.
The available optional items are listed in Table 0-3.
Table 0-3 Options
Part Part code Qty. Remarks
Holding jig for D4 KJJ200100 1 for zirconia capillary ferrule
(diameter:2.0mm (0.0787
inch))
Angled PC polishing set
(minimum set) KJS100500 1 set for angled PC polishing
OFL-12 consumer
supplies kit for alumina
ceramic capillary ferrule KJS100200 1 set for alumina ceramic
capillary ferrule