Smeg STL 60 - Manual (Page 16)

GB 14
INSTALLATION
Removal of transport bracket
The washing machine is fitted with a transport bracket to
avoid any possible damage during transport.
Before using the washing machine, the transport
bracket at the back MUST be removed.
1. Unscrew the two screws A and the four screws B with a
flat screwdriver or a No. 8 hex nut box spanner.
2. Remove the transport bracket.
3. Replace the four outer screws B on the machine and
tighten them.
4. Remove the two seals C from the hose holder and clip
them into the openings of the machine D.
Note: do not forget to replace and tighten the four
outer screws.
2
1
1
4
C
A
B
D
1
4
D
IFU_Alpha_Sc1-mech_GB.fm Page 14 Wednesday, March 30, 2005 6:52 PM
Black process 45.0° 100.0 LPI