beautypg.com

Schumacher 00-99-000659 User Manual

Page 9

background image

9

DIgITAL DISPLAy fUNCTIONS

1. PP-18400CI – To check the internal

battery’s status, press the DISPLAY

button on the front of the PP-18400CI.

The display will show the voltage of

the internal battery.

2. When hooked up to the vehicle's

battery, the digital display shows the

combined vehicle's voltage and the

PP-18400CI's internal battery volt-

age.

3. AC Power – When using the PP-

18400CI inverter, the digital display

shows the wattage and voltage of

the device being powered. Push the

DISPLAY button to read wattage

or push DISPLAY button again to

read voltage. The internal battery is

specifically designed to deliver high

power jump-starting as well as repeti-

tive deep cycling performance.

ChARgINg INTERNAL bATTERy

NOTE: Internal battery’s status DISPLAY

is most accurate when the Portable Power

PP-18400CI has been disconnected from

all devices and charging sources for at

least 30 minutes. The DISPLAY feature

will not work when the Portable Power is

being charged.
CAUTION: Operating the Portable Power

PP-18400CI while the internal battery is

being charged may cause permanent

damage to the PP-18400CI.

1. To check the internal battery’s charge

level, press the DISPLAY button. The

Digital Display will show the battery’s

voltage.

2. To charge, follow instructions

CHARGE INTERNAL BATTERY on

page 4.

3. Once the battery is fully charged,

the built-in charger automatically

switches to float-mode monitoring,

which trickle charges the battery

and keeps it fully charged without

overcharging so the PP-18400CI may

be left permanently connected to the

electrical wall outlet.

USIng the MAle-to-MAle ChARg-

INg CORD
The internal battery may also be charged

while you drive by using the male-to-male

accessory cable (included).

1. Make sure the PP-18400CI is OFF.
2. Insert one end of the male charging

cord into the PP-18400CI’s 12V DC

power outlet and the other end into

the vehicle’s accessory outlet (lighter

socket).

Important: Disconnect

power cord from the PP-18400CI and

the vehicle’s accessory outlet when

engine is not running.

This manual is related to the following products: