Sharp Aquos LC 26D5U - Manual (Page 31)

30
Press MENU to display “Remind Options”.
Press a/b to select “new manual reminder”
and then press ENTER.
New manual reminder
Instead of setting a reminder from the program
LISTINGS, you can set a reminder manually for a
program that you want to watch or a recording you
have set.
Press ENTER to highlight “schedule
reminder”.
NOTE
• The program set to be manually reminded is listed by
channel number in the SCHEDULE.
Watching TV (TV Guide On Screen)
• “Remind Options” screen displays.
Press a/b to select the program you want
to record.
1
Press a/b to select “new manual recording”
and then press ENTER.
New manual recording
Aside from setting recordings using the program
LISTINGS menus, you can also define the schedule of
recordings manually by following the steps below.
• “Record Options” screen displays.
Press ENTER to highlight “schedule
recording”.
NOTE
• The program set to be manually recorded is listed by
channel number in the SCHEDULE.
5
Press ENTER again to exit.
Press ENTER again to exit.
2
3
4
Press MENU to display “Record Options”.
Press a/b to select the program you want
to set reminder.
1
2
3
5
4
—
—
—
—
analog/digital air/
digital cable/input 1/
input 2/input 3/
VCR/i.LINK
once/weekly/daily/off
Setup
items
date
start
end
channel
input
recorder
frequency
Description Selectable items
Set a date to record
Set a start time to
record
Set an end time to
record
Set a channel to
record using 0–9
Set the external
recording device or
antenna source
Select a recorder you
connected
Set the recording
cycle
—
—
—
—
analog/digital air/
digital cable/input 1/
input 2/input 3/
yes/no
yes/no
once/weekly/daily/off
Setup
items
date
start
end
channel
input
power on TV
auto tune TV
frequency
Description Selectable items
Set a date to remind
Set a start time to
remind
Set an end time to
remind
Set a channel to
remind using 0–9
Set the external
device or antenna
source
When this is set to
“yes”, the TV will
automatically switch
on at the time the
reminder was set for.
When this is set to
“yes”, the channel will
be automatically
changed before the
reminder screen is
displayed.
Set the reminder cycle