Sending a fax – Samsung sf 150 User Manual

Page 24

C h a p t e r T h r e e

ACHINE

HAPTER

HREE :

ACHINE

3.1

In this chapter, you will learn how to send and receive fax documents, use the four fax
reception modes, and the voice request feature.

Sending a Fax

Preparing a Document

Here are some things you can do to improve the quality of your faxed documents:
¥ Send documents printed using a typewriter, felt trip pen, black ink, or laserwriter.
¥ The paper should be white or very light and of normal weight.
¥ Do not attempt to feed the following types of document into the unit, or they may jam.

Instead, make a photocopy first, and then send the copy.

- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
- Carbon paper or carbon-backed paper
- Coated paper
- Too thin (less than 0.074mm) or thick (more than 0.15mm) paper

¥ Remove clips, staples, or other similar objects from documents before feeding them

into the machine.

¥ Let ink or paste on documents dry completely before sending.
¥ The machine can transmit documents with the following size.

Maximum

Minimum

216mm

152mm

127mm

Up to maximum
of 1500mm

Feeding
direction

¥ The shaded parts of the document shown below are not recorded by the receiving

facsimile machine. Write your information within the effective scanning area.

5mm approx.

1.8mm approx.

→

→→

Ch-3 3/25/98 6:28 PM Page 2