Sony D-NE715 - Manual (Page 26)

26
-GB
Connecting a stereo
system
You can listen to CDs through a stereo
system and record CDs on a cassette tape.
For details, see the instruction manual that
comes with the connected device.
Be sure to turn off all connected devices
before making connections.
Notes
• Before you play a CD, turn down the volume of
the connected device to avoid damaging the
connected speakers.
• Use the AC power adaptor for recording. If you
use dry batteries as a power source, batteries may
become completely depleted during recording.
• Adjust the volume properly on the connected
device so that the sound will not be distorted.
When using the connecting cord
If the sound is distorted, connect the device
to the i jack.
About the G-PROTECTION and
SOUND functions when using the
connecting cord
• To record high quality CD sound, set the
G-PROTECTION switch to “1.”
• The SOUND function works only on the
output sound from the i jack and not work
on the output sound from the LINE OUT
jack.
Stereo system,
cassette recorder,
radio cassette
recorder, etc.
B Connecting your CD player
Connecting cord
(not supplied)
Left (white)
Right (red)
to LINE OUT