Sharp AL-1655CS - Manual (Page 16)

14
INSTALLING THE TD CARTRIDGE
1 Open the bypass tray, and
then open the side cover.
2 Remove the CAUTION tape from the front cover and remove the
two protective pins from the fusing machine by pulling the
strings upward one at a time.
3 Press gently on both sides of
the front cover to open the
cover.
4 Remove the TD cartridge from the bag. Remove the protective
paper. Hold the cartridge on both sides and shake it
horizontally four or five times. Hold the tab of the protective
cover and pull the tab to your side to remove the cover.
CAUTION tape
Protective pins
4 or 5 times
!01-Introduction.fm 14 ページ ２００４年９月１６日 木曜日 午後４時５４分