Optional cycle, Troubleshooting, Optional cycle troubleshooting – Samsung SW81ASP User Manual
Page 9
8
OPTIONAL CYCLE
TROUBLESHOOTING
Washing machine won’t work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is the fuse all right?
Is there enough water?
Water is not supplied
Is the water tap opened?
Is the water cut off?
Is the water supply hose or
hose connection clogged?
Is the water tap frozen?
If water is not supplied in 60 minutes,
a buzzer will sound, and the remaining
time indicator will shown “7E”.
Water does not drain
Is the drain hose down? (No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water does not drain in 15
minutes, a buzzer will sound, and the
remaining time indicator will show “E”
Water supply does not stop
Close the water tap.
Disconnect the power supply card.
Call to service center or agency.
While lid is opening,
the washing machine won’t work
Make sure to close the lid while washing machine is
operating.
Spinning does not work
Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Is the lid closed?
WASH ONLY
●
When you choose this cycle, wash cycle is operated.
●
Pressing optional cycle key during washing changes
the wash time in two minute intervals.
●
The wash time can be changed to between 3 and 25
minutes.
●
Load size and water level is determined automatically
❈
Unplug the power cord after washing.
SOAK
●
The laundry is soaked in water so that heavy dirt can be
eliminated sufficiently.
●
You can choose soak cycle after choosing wash
program.
●
When you select soak function, 5 minute cycle (1 min.
washing then 4 min. pause) continue for 30 minutes
before main wash program.
●
Load size and water level is determined automatically
❈
Unplug the power cord after washing.
SPIN ONLY
●
You can choose this cycle, only cycle is operated.
●
Pressing cycle key during spinning only cycle changes
the spin dry time.
The spin dry time can be changed to between 1 and 7
minutes.
❈
Unplug the power cord after washing.
DELAY START
●
This function allows you to delay the start of your chosen wash program for 3, 4, ... 18 hours.
●
By pressing the delay start key you can select delayed period for 3, 4, ... 17, 18 hours, and your washing machine will
finish the selected wash program after the delayed period.
RINSE AND SPIN ONLY
●
When you choose this cycle, only rinse & spin cycle are
operated without wash cycle.
●
Pressing cycle key during operation changes the
number of rinse (see above).
You cannot change the spin dry time using this function.
❈
Unplug the power cord after washing.
DRIP DRY
●
The function allows you to take drip clothes out of the
washing machine while they are still wet before the final
spin.
●
You can choose drip dry cycle after choosing main
wash program.
●
When you select drip dry the cycle in finished before
final spin.
❈
Unplug the power cord after washing.
RINSE ONLY
●
When you choose this function, only rinse cycle is
operated.
●
Pressing function key during rinsing changes the
number of rinse. Up to 5 rinses can be optionally
selected.
❈
Unplug the power cord after washing.