Star Micronics TCP400 Series - Manual (Page 6)

– 3 –
3. External Appearance and Part Names
1. Power Switch ............................ This turns the power to the reader/writer on and off.
2. Power Lamp ............................. Indicates that reader/writer power is on.
3. Status Lamp .............................. Indicates printer ready, printing and errors.
4. Cleaning Lamp ......................... Indicates the reader/writer needs cleaning.
5. Interface Connector ................. Connects to host computer via a cable.
6. AC Inlet .................................... Connects to accessory power cord.
7. Cleaning Switch ....................... Press the cleaning switch while turning the power on.
Insert a cleaning card dampened with alcohol to
clean the reader/writer.
6
5
4 3
7
2
1
2. Unpacking
The following outlines the reader/writer and its accessories.
1. Reader/writer
2. Power cord
3. Cleaning cards (2 cards)
4. Ferrite core
5. This manual
6. Font setting card
3
5
4
1
2
6
Note :Whether there are a ferrite core and font set-
ting card depends on the reader/writer model.