Smithco 72-000-A - Manual (Page 10)

8
Introduction
CONTROLS & INSTRUMENTS
A. Hopper Lever - The hopper
lever is used to lift and lower
the hopper which also opens
and closes the tailgate. Refer
to decal for direction.
B. Finger Reel Off-On Valve -
Turns the reel on or off. Refer
to decal for direction.
C. Deck Lift Lever - The deck
lift lever is used to raise and
lower the reel. Refer to decal
for direction.
D. Thatch Reel Off-On Valve -
Turns the reel on or off. Refer
to decal for direction.
HOPPER LIFT SAFETY
The Hopper Lift Safety is used to support
the ram on the hopper bottom in the extended position so you may service or repair the machine under the hop-
per. When not in use the Hopper Lift Safety can be stored on the hopper bed frame.