Sanyo PLC-XL40 - Manual (Page 21)

21
Basic Operation
Menu bar
Pointer
(red frame)
Menu icon
Item data
Press the Point
7 8
buttons to adjust the
value.
SELECT
button
Pointer (red frame)
Press the Point
ed
buttons to move the
pointer.
Item
How to Operate the On-Screen Menu
On-Screen Menu
Quit
Exit this menu.
The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
Use the Point 7 8 buttons to select a Menu icon; use
the Point ed buttons to select an item.
Press the SELECT button to show the item data. To
adjust the data, use the Point
7 8 buttons. Refer to
the relevant pages for more details about each
adjustment.
To close the On-Screen Menu, press the MENU
button again.
Press the MENU button on the top control or on the
remote control to display the On-Screen Menu.
✔
Note:
•The selected item is not active until the SELECT button is pressed.
1
2
3
SELECT button
POINT buttons
Remote Control
MENU button
ON
- OFF
POWER
KEYST
ONE
INPUT
WARNING LAMP REPLA
MENU
- VOLUME
+ VOLUME
SELECT
Top Control
MENU button
SELECT button
POINT button