Smooth Fitness 5.65S - Manual (Page 39)

www.smoothfitness.com 39
TROUBLESHOOTING
SYMPTOM CAUSE SOLUTION
No power to display
A). Not plugged in.
B). Power switch not activated
C). Power inp t circuit breaker blown.
Please check power input and fuse.
Contact your dealer if unit is plugged in,
powered on and circuit breaker is
depressed
LED display partially lit
LED error
Contact your dealer for troubleshooting
Computer displays E1
A).speed sensor comunication problem.
B).Motor console damaged
.
Switch off the power and switch on after 10
seconds then press START. Check:
1. Does the running belt move?
2. If the running belt moves, does E1
appear after 10 seconds?
If the belt moves and E1 does not appear
after powering off, lubricate the running belt
and deck. If the belt does not move and E1
appears, please contact your Dealer
Computer displays E7 Incline malfunction Contact your Dealer.
Computer displays E8 EPROM Error
Contact your Dealer for troubleshooting
Computer displays E9
A).Do not hold hand pulse device during
Body Index test.
B). Hand pulse device problem.
Test again according the steps.
Contact your dealer.
LED display Show "--" The safe key is not in place.
Place the safety key in correct position. See
page 27