SOYO SY-P4I845PE - Manual (Page 42)

BIOS Setup Utility SY-P4I845PE
38
3-1 SOYO COMBO SETUP
This Motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO Feature].
After the hardware installation is complete, turn the power switch on, then
press the key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display on
screen. Then, select the [SOYO COMBO Feature] option from the main
menu and press the key.
CMOS Setup Utility – Copyright ( C ) 1984-2002 Award Software
SOYO COMBO Feature
System Performance Normal Item Help
CPU Clock Auto
x Frequency 1MHz Stepping 100MHz
DRAM: CPU Ratio Auto
CPU Clock Ratio 19 x
AGP/PCI Clock Setting 66/33 MHz fix
x AGP/PCI Clock Table 67/33 MHz
Auto Detect PCI Clk Disabled
Spread Spectrum Disabled
Advanced DRAM Control Press Enter
CPU Vcore Select Default
DDR(2.5V) Voltage Select Default
AGP(1.5V) Voltage Select Default
Quick Power On Self Test Enabled
C.I.H 4-WAY Protection Disabled
Onboard IDE RAID Disabled
Onboard LAN Enabled
AC97 Audio Auto
First Boot Device Floppy
Second Boot Device HDD-0
Third Boot Device LS-120
Boot Other Device Enabled
RAID/ATA & SCSI Boot Order RAID/ATA, SCSI
Menu Level
Move Enter : Select + / - / PU / PD : Value F10 : Save ESC : Exit F1: General Help
F5 : Previous Values F6 : Fail – Safe Defaults F7 : Optimized Defaults