SOYO SY-P4I845PE - Manual (Page 36)

Hardware Installation SY-P4I845PE
32
Audio Upgrade
The standard configuration of the P4I845PE motherboard supports 2 or
4-channel audio.
Step 5 Power On
You have now completed the hardware installation of your Motherboard
successfully.
1. Turn the power on
2. To enter the BIOS Setup Utility, press the key while the system is
performing the diagnostic checks,
Note: If you have failed to enter the BIOS, wait until the boot up
sequence is completed. Then push the RESET button and press
key again at the beginning of boot-up, during diagnostic
checks.