Sirius Satellite Radio SV3 - Manual (Page 30)

[
Operation
]
Jump Button
Pressing the Jump button will jump to a traffic/weather channel which you have chosen for
your area. This button allows you to quickly tune the traffic/weather for your area and then
tune back to the original channel by pressing the button again. (Figure 11)
Refer to the Jump Settings section in the Menu Options section for information on configur-
ing the Jump button for traffic/weather in your area.
Jump to NYC
0 2 2 1 s t W a v e
If your traffic/weather report is not immediately available, the display will indicate that a jump
is pending. (Figure 12) Once your local traffic/weather report is ready, the radio will automati-
cally tune to the traffic/weather channel. You may have to wait a few minutes for your desired
report.
NYC Pending
0 2 2 1 s t W a v e
Pressing the Jump button while a jump is pending will cancel the jump. Pressing the
Jump button after the radio has tuned to the traffic/weather report will return to the channel
to which you had been listening immediately prior to pressing the Jump button.
figure 11 figure 11
figure 12 figure 12