Sharp 27N S50 - Manual (Page 28)

28
Set Up (Continued)
L Saving broadcast TV channels into memory.
1.1
Press MENU to access MAIN MENU
screen, then press CH UP ( 8 ) or
DOWN ( 9 ) to move the “ ” mark to “SET
UP”.
1.2
Press VOL (+) or (–) to access SET UP
mode, then press CH UP ( 8 ) or
DOWN ( 9 ) to move the “ ” mark to “CH
SETTING”.
1.3
Press VOL (+) or (–) to access CH
SETTING mode.
1.4
Press CH UP ( 8 ) or DOWN ( 9 ) to move
the “ ” mark to “CH SEARCH”, then press
VOL (+) or (–) to access CH SEARCH
mode.
START
2.1
Press VOL (+). The tuner will search
through all available channels in your area
and add them into the TV’s memory.
STOP
2.2
Press VOL (–). CH SEARCH will stop at
the current channel and will not add any
higher channels.
2.3
Press MENU to exit.
L Adding weak or additional channels or erasing unwanted channels from TV memory.
1.1
Press MENU to access MAIN MENU
screen, then press CH UP ( 8 ) or
DOWN ( 9 ) to move the “ ” mark to “SET
UP”.
1.2
Press VOL (+) or (–) to access SET UP
mode, then press CH UP ( 8 ) or
DOWN ( 9 ) to move the “ ” mark to “CH
SETTING”.
1.3
Press VOL (+) or (–) to access CH
SETTING mode, then press CH UP ( 8 ) or
DOWN ( 9 ) to move the “ ” mark to “CH
MEMORY”.
→
(START)
(STOP)
(CH SETTING mode)
(CH SETTING mode)
→
→
→
(CH SEARCH mode)
→
→
2.1
Press VOL (+) or (–) to access CH MEMORY.
2.2 Use CH UP ( 8 ) or DOWN ( 9 ) or REMOTE
KEYPAD to select each desired channel
to add or erase.
2.3
Press VOL (+) to add a channel to the TV’s
memory or press VOL (–) to erase a
channel from the TV’s memory.
or
26-29 27N-S50 6/1/00, 11:44 AM 28