Sony SA-VE312 - Manual (Page 6)

6 GB
Hookup C (for SA-VE312)
This configuration is used when the amplifier is connected to a CD player, MD deck, cassette
deck, or other audio devices.
eE Ee
Ee Ee
FRONT
R
L
R
L
SPEAKER
IN
SPEAKER
OUT
e
e
E
E
R L
Terminal connections
Notes
• Make sure the plus (+) and the minus (–) terminals on the speakers are matched to the corresponding plus (+)
and minus (–) terminals on the amplifier.
• Be sure to tighten the screws of the speaker terminals securely as loose screws may become a source of noise.
• Make sure all connections are firm. Contact between bare speaker wires at the speaker terminals may cause a
short-circuit.
• Do not connect the subwoofer to the amplifier’s CENTER output terminal (which is for Dolby Pro Logic or
Dolby Digital (AC-3)). No bass sound will output from the subwoofer if you do.
• For details regarding the connections on the amplifier side, refer to the manual that was provided with your
amplifier.
Tip
All striped wires are minus (–) in polarity, and should be connected to the minus (–) speaker terminals.
Hooking up the system (continued)
Front (Right)
Subwoofer
Front (Left)
Amplifier
E
e
E
e
E
e
E
e