Southbend Swivel Mast Bandsaw sb1018 - Manual (Page 54)

-52-
For Machines Mfg. Since 8/09 Model SB1018 P A R T S
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at
(360) 734-1540 or www.southbendlathe.com to order new labels.
Machine Labels
REF PART # DESCRIPTION REF PART # DESCRIPTION
501 PSB1018501 MACHINE ID LABEL 508 PSBLABEL01HS READ MANUAL LABEL
502 PSB1018502 MODEL NUMBER LABEL 509 PSBLABEL13VS DOOR CLOSED WARNING LABEL
503 PSBLABEL15S ELECTRICITY LABEL 510 PSBPAINT01 SB LT GRAY TOUCH-UP PAINT
504 PSB1017304 BELT COVER WARNING LABEL 511 PSBPAINT03 SB DK BLUE TOUCH-UP PAINT
505 PSBLABEL02HS DISCONNECT WARNING LABEL 512 SB1320 SOUTH BEND NAMEPLATE 125MM
506 PSB1017306 CUTTING HAZARD WARNING LABEL 513 PSBPAINT02 SB LT BLUE TOUCH-UP PAINT
507 PSBLABEL04HS EYE INJURY WARNING LABEL
501
502
503
504
505 506 507
508
509
510
511
512
513