Synopsys 640-pin Generic Device Adapter - Manual (Page 19)

November 2001 Synopsys, Inc. 19
The ModelSource 640-pin Adapter Chapter 3: Connecting the Daughterboard
3
Connecting the Daughterboard
This section describes the Adapter and gives instructions for interconnecting it and the
Daughterboard.
Adapter Description
Figure 4 shows a drawing of the Adapter. The items of interest to the user are as follows:
●
Connectors that mate with Daughterboard connectors J1–J6
● Ejectors for disconnecting the Daughterboard from the Adapter
●
Guide pins that fit the Daughterboard guide pin holes to ensure correct orientation
●
Test points for the signals TRIGGER, KEEPALIVE, PLAY, FEEDBACK,
SAMPLE, ADJVCC1, +5V, -5V, and GND