Controlling your tv with the supplied remote, Preparing the remote for controlling the tv, Saving power in standby mode – Sony F500 User Manual

Page 50: Controlling your tv with the supplied, Remote

Controlling Your TV with
the Supplied Remote

By adjusting the remote signal, you can control
your TV with the supplied remote.

Note

• When you replace the batteries of the remote, the

code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.

Press and hold TV [/1 while entering your
TV’s manufacturer’s code (see the table)
using the number buttons. Then release TV
[/1.

If the setting is unsuccessful, the currently
registered code is not changed. Re-enter the
code number.

Code numbers of controllable
TVs

If more than one code number is listed, try
entering them one at a time until you find the
code that works with your TV.

Saving Power in Standby
Mode

Check that the following settings in [System
Settings] are made:

– [Control for HDMI] in [HDMI Settings] is set

– [Quick Start Mode] is set to [Off] (page 55).

Preparing the remote for
controlling the TV

Manufacturer

Code number

SONY

01 (default)

SAMSUNG

02, 08

PHILIPS

02, 03, 07

PANASONIC

TOSHIBA

This manual is related to the following products: