Sagem MW 302X - Manual (Page 48)

47
11. Other functions
To use your phone
with a hands free kit,
see the notes
supplied with the kit.
This delay starts
counting down as
soon as the end of a
call is detected.
This can only
happen when the
vehicle is not
running.
The alarm function
is represented on
the screen by the
symbol .
Permanent flashing
of this symbol
indicates that an
alarm time has been
programmed but the
date and time clock
has not been
initialised.
The ringer is stopped by pressing
any key; the alarm remains
programmed.
The alarm function remains active
when the phone is switched off. It is
not affected by silent mode.
11.3 Setting the timer
The same procedure is applied as
for the alarm function, but in this
case you start a time clock running
against a defined value. The phone must
remain switched on.
11.4 Configure your phone
with a car kit
(Depending on the model)
As regards the phone, there are several
options:
Programming the switch-off delay on your
phone
Set the phone off delay using the
numbers or scrolling arrows.
Press to go to the next item.
Tick the box and validate by pressing OK.
Programming the alarm timing
You can be notified that your phone
is ringing when you are not in your
car.
Set the delay after which an
external warning is set off using the digits
or scrolling arrows.
Tick the box and validate by pressing OK.
11.5 Data parameters
You can set the serial link speed when using
AT commands.