Samsung CTI613EH - Manual (Page 18)

1_ hob use
swITCHINg THE applIaNCE oN
1. Touch the lock control sensor for approximately 3 seconds.
. The appliance is switched on using the on/off
control sensor.
Touch the
on/off control sensor for 1
second.
The digital displays will show .
After the on/off control sensor has been actuated to switch on
your appliance, a heat setting must be selected within approximately 10
seconds. Otherwise, the appliance will switch itself off for safety reasons.
sElECT CookINg zoNE aND HEaT sETTINg
1. For selecting the cooking zone, touch the
corresponding cooking zone’s key.
. For setting and adjusting the power level (
to
) for cooking, touch the heat setting
selectors ( or ).
For faster adjustment, keep your finger on the heat setting selectors (
or ) until the required value is obtained.
If more than one sensor is pressed for longer than 10 seconds, will
show in the heat setting display. To reset, touch the
on/off control
sensor.
swITCHINg THE applIaNCE off
To completely switch off the appliance, use the
on/off control sensor.
Touch the
on/off control sensor.
approx
1 sec.
CTI613EH series_EN-00204A_XSA.in18 18 2009-02-25 10:07:41