Sanyo SC-X1801R - Manual (Page 7)

Attention: To lock the front cover firmly, snick it softly until it sounds “Click”
If the blockage is found in floor brush, hose or tubes and the
machine, the machine can be re-operated only after the
blockage is cleaned away completely.
This vacuum cleaner can be used as tip the rubbish out of the
full dust cup.
5
Figure_1 Figure_2 Figure_3 Figure_4
Figure_5 Figure_6 Figure_7 Figure_8
Maintenance
CAUTION
Be sure to turn the power off and unplug the unit before cleaning.
1. Clear the dust: when the dust collect to the MAX label of the filter,
rubbish shall be tipped from the dust barrel.
1) Press the front cover clip beside the suction socket and open the
front cover.
2) Take out the dust cup and clean the dust away completely.
3) Clean the dust cup with warm water if necessary.