Server Technology PP02 - Manual (Page 24)

Selecting the RE BOOT Method
DIP-switch 5 selects between the No Answer RE BOOT and the On-Hook RE BOOT methods:
5|OFF On-Hook RE BOOT Method
5|ON No Answer RE BOOT Method
DIP-switches 5 and 7 select the +Aux Port (Secure) RE BOOT method:
5|ON 7|ON
Ring-Count Select
DIP-switch 6 selects the minimum Ring-Count required to initiate a RE BOOT when rings cease.
6|OFF Ring-Count required = Eight (8)
6|ON Ring-Count required = One (1)
Off-Hook RE BOOT Option
DIP-switch 8 enables the maximum 2-hour Off-Hook limit. Any off-hook condition exceeding 2 hours will initiate an
immediate
RE BOOT.
8|OFF Off-Hook RE BOOT Option - Disabled
8|ON Off-Hook RE BOOT Option - Enabled
Technical Note: Because the telephone company RING signal is not always synchronized between the calling and
receiving parties, it is best to allow one extra ring when counting the rings to effect a reboot (1 or 8 rings). For example,
if the eight (8) ring option is selected, allowing the line to ring nine (9) times should guarantee that the required minimum
number of rings have occurred at the target end of the call.
Remote Power On/Off RE BOOT Mode • 24