Sony BRAVIA 4-256-733-F2(1) - Manual (Page 34)

34 GB
Analog controller (DUALSHOCK®2)
z
• Depending on the software, the buttons for use in analogue mode may be limited. Refer to the instructions
supplied with the software for details.
• The vibration function can be set to on or off in the software options menu. Depending on the software, the
vibration function may be set to on automatically.
Button/Switch Description
1 L2 button
2 L1 button
3 SELECT button
4 Directional buttons
5 Left analog stick/ L3 button z
• The left analog stick and L3 button, function only in analogue mode
(indicator: red).
• The L3 button function when the analog stick is pressed.
6 ANALOG mode button Switch between digital mode and analogue mode.
7 Mode indicator Digital mode: Lights off.
Analogue mode: Lights up in red.
z
• Depending on the software, you may not be able to switch modes
even if you press the ANALOG mode button.
8 R2 button
9 R1 button
q; START button
qa f/a/×/s buttons
qs Right analog stick/ R3
button z
• The right analog stick and R3 button, function only in analogue
mode (indicator: red).
• The R3 button function when the analog stick is pressed.