Sonic Blue DVR4400 - Manual (Page 17)

11
Connections
G
e
tting
Sta
rted
Se
tu
p
Basi
c
Ope
rations
Ad
vanc
e
d
Fe
atures
He
lp
Audio/Video Receiver Connections
Follow these steps to connect the DVD+VCR to an audio/video receiver.
1 Connect DVD+VCR to Audio Receiver Connect a coaxial digital
audio cable from the DIGITAL AUDIO OUT jacks on the back panel of the
DVD+VCR to the matching digital audio input on your audio/video receiver.
2 Adjust Dolby/DTS Decoder Settings Set Dolby Digital Decoder
and DTS Decoder in the menu system (required); see page 29.
• If your audio/video receiver is equipped with a Dolby Digital or
DTS Decoder, you MUST enable the correct decoder setting in
the menu system to prevent damage to your speakers; see
page 29
DVD+VCR
Digital Audio Receiver