Using the time code, D i sp. on t i me code, On t c ou t – Sharp VL-WD250U User Manual
Page 54
41
Useful Features
Playback
Useful Features
Using the Time Code
The time code shows the hour, minute and
second of recording, and the frame number
(1 frame = approx. 1/30 sec.). This is automati-
cally recorded along with the subject. You can
display the time code on the screen as an
accurate counter in both VCR and CAMERA
modes.
Frame number*
Display format
0
0
0
1 0 2 0
T C
• The example screens for this feature are for VCR
mode.
1
During playback or recording, press the
MENU/DISPLAY button until the menu
screen appears.
2
Select
I
, then press
r
on the
Operation button. Select “TIME CODE”
(
1
), then press
r
(
2
).
3
Press
d
or
y
to select “DISP. ON”,
then press
e
.
4
Press the MENU/DISPLAY button to
turn off the menu screen.
• The time code appears.
D I SP. OF F
D I SP. ON
OT HERS
REMO T E
SOUND
T I ME CODE
T C OU T
D I SP. ON
T I ME CODE
SP
TC 0 0 5
:
3 5
:
To turn off the time code
Select “DISP. OFF” in step 3 above.
Note:
• When the tape reaches an unrecorded section,
the time code returns to zero (TC0:00:00). Once
recorded, the time code cannot be changed.
Displaying the time code on a TV
during playback
1
In VCR mode, select
I
, then press
r
on the Operation button. Select “TC
OUT” (
1
), then press
r
(
2
).
OF F
ON
OT HERS
REMO T E
SOUND
T I ME CODE
T C OU T
2
Press
d
or
y
to select “ON”, then
press
e
.
ON
T C OU T
Second
Minute
Hour
* Displayed during still
or frame advance
playback.
Time code