Sony CDP-CX55 - Manual (Page 19)

Playing CDs Getting Started
19
Playing CDs
Changing the programmed order
You can change your program before you start playing.
To
Erase a track or disc
Erase the last track or
disc in the program
Add tracks or discs to the
end of the program
Change the whole
program completely
Erasing the programs stored in memory
1 Press PROGRAM repeatedly in the stop mode
until the program number (PROGRAM 1, 2 or 3)
you want to erase appears in the display.
2 Hold down CLEAR until ”ALL CLEAR” appears
in the display.
You need to
Press CHECK until the track or
disc you do not want appears in
the display, then press CLEAR
Press CLEAR. Each time you
press the button, the last track or
disc will be cleared.
Follow the programming
procedure
Hold down CLEAR until “ALL
CLEAR” appears in the display to
erase the whole program, then
create a new program following
the programming procedure
Press and hold LOOP during playback at the point you
want to start the Loop function, and release to resume
normal play.
To adjust the loop length
Press DISC SKIP +/– while holding LOOP on the remote to
select different loop lengths (LOOP 1–20).
Playing Your Favorite Disc
Independently (Plus One Play)
When you insert a disc into the PLUS ONE slot, you
can play the disc independently from other discs.
When using this function, the player is automatically
set to 1 DISC Continuous Play mode.
PLUS ONE
Front cover
Looping Part of a Disc (Loop)
Z
You can repeat part of a disc during playback. This
function lets you create original recordings.
LOOP
1
Open the front cover.
PLUS ONE slot
2
Press PLUS ONE.
The indicator on the PLUS ONE button lights up.
The PLUS ONE slot comes to the loading position.
PLUS ONE
1
2
3
4
5
6
7
8
9
50
49
48
47
46
45
44
43
42
41
(Continued)
CD1
DISC
* D I S C - P L U S 1 * P 1
DISC SKIP +/–