Camera exposure profiling, English – Sekonic L-758D User Manual

Page 51

-45-

ENGLISH

7. Camera Exposure Profiling

2-2 Manual Exposure Profile Input

It situations where it is not possible or convenient to use a computer or the Sekonic Data
Transfer Software, Exposure Profile data can be entered into the L-758DR (L-758D or L-758CINE)
directly. Below is the step by step process for manually entering a specific Exposure Profile.

1) With the meter turned off,enter the Camera Expo-

sure Profile mode by pressing the Power button

while pressing the AVE../

EV button

the same time..

2) In the Camera Exposure Profiling mode, the cur-

rent (or preset) contents are displayed.

3) Setting Individual Exposure Profiles (Camera 1, 2

and 3)
Press MID.TONE button

while pressing ISO1

button

to select the desired camera exposure

profile.

4) Setting measuring mode

Rotate the Jog wheel

while pressing the Mode

button

to select measuring mode (ambient or

flash including all flash mode)

5) Setting light receiving method

Turn the Incident/reflected spot selector dial

select incident or reflected light.

6) Setting ISO sensitivity

Rotate the Jog wheel

while pressing the ISO1

button

to select ISO sensitivity.

This manual is related to the following products:

L-758